Progress on the Gryphon Tapestry

(an explanatory supplement to esqg’s recent pictures)

I’ve been working on the top (the eagle part); esqg on the bottom (the lion part).  I’ve been working on the wings, and (in the pictures esqg posted yesterday) am just about to start working on the head. Esqg, meanwhile, has been navigating a dense assortment of legs and tails, and has just finished the tuft of hair at the tip of each tail.

By measurement, we’re about a third of the way done (we’ve spent a ridiculous amount of time this week weaving). On the other hand, progress in inches is  likely to start slowing rapidly: I’ve had it pretty easy so far but once I get to the head, things will start to get, well, if not hairy, than at least very, very feathery.

The pictures also show the evolution of the s-shaped crack in the middle of the tapestry, which appears to be developing more or less according to plan. The plan is eventually to cut the tapestry in half along that crack (so that esqg and I each get a tapestry to keep), and hem each side with ribbon. I’m confident that we’ll be able to do this, but I’m starting to worry about exactly how. Experience with the dragon tapestry has shown that it’s safe to take a tapestry out of its frame: that is, you can cut the knots on the outside of the frame, and the warp threads won’t rebound backwards into the tapestry anywhere near far enough to risk unravelling the edges. In principal, this should be similar–and even easier, since once the tapestry is out of its frame, the threads won’t even be under tension. On the other hand, I think I hadn’t quite realized how very little margin there’s going to be at the edges of the tapestry. It will presumably be necessary to assure ourselves that the threads on the edge of the crack are well and truly locked to their warp threads before cutting anything.

Better tapestry pictures

We’ve been making progress! There isn’t much to say about it, except that I now have a proper digital camera so you can see the results.

Gryphon tapestry: claws, wingtips and diagram

Elisabeth,  silkspinner and I have made progress on the gryphon tapestry!

We found a small picture of a gryphon online, scaled it up so that it was low-resolution, and traced outlines onto graph paper.  We taped enough graph paper together to make a diagram to scale, and scaled up the beginning diagram by the low-tech method of drawing in nine squares what originally was in one.  Then we used a lot of our imagination to fill in some details on the main diagram; there may be too many details to cover in the tapestry, but given what we know of the techniques of the last one we think we should be able to manage.  We have not yet had the perseverance to reproduce our single gryphon in mirror image on the other side, so we now have half a diagram taped to the back of the tapestry.  Still, it can be used!

upperdiagram

The two pictures here don’t quite fit together; my photography skills are currently limited by my cell phone’s camera.

lowerdiagramWe bought a variegated yarn for the background color, so that it varies between dull green, blue-green, and blonde.  We have three levels of shading for the “lion” hindquarters, and three for the eagle, as well as gold and black.  When weaving the dragon tapestry we had trouble finding all our threads of the right thickness, so we ended up with some five-ply threads that we had to re-ply (in pieces) into three-ply thread.  This time we shouldn’t have to do much of that, though the black thread will have to be divided up.

In the past week or so Elisabeth and I began weaving, leaving a gap of one bare warp thread for the divide between the two halves, and making sure the halves are woven at the same rate.  Today, we brought it with us to New York, and this afternoon silkspinner joined us in working on it!  Elisabeth started the tips of the wings today, but so far they’re hard to see because the “eagle green” color (a yarn handspun by silkspinner herself) is as dark as parts of the background.  Meanwhile silkspinner and I struggled through the first rows of the hind claws and tail.  I copied what she did, some of which you can see here:

lowerdivide1Here you can see the wood frame and warp threads where they appear in the middle of the divide.  Since this is the edge, the curve of the divide is especially steep.   The overwhelming majority of the color in this picture is supplied by the variegated background thread, but towards the top you can see the bottom of the claws in gold, the lion color, and the lion-shadow color.  The splotch of lion to the right is the bottom scoop of the tail.  So far we’re at 20 rows on the bottom and 21 at the top!

Gryphon Tapestry: Threading up the Loom

Three years ago, Elisabeth and I decided that it would be a great idea to make a tapestry.  There should be upcoming posts from us or the others recruited to the cause; it took two and a half years and had many contributors.  It is purple, and features a dragon.  In any event, since she and I are living in the same place this year we have decided to make a smaller tapestry together.  This time, it will be green, with gryphons!  Or griffins, if you must.  We spent much of today making the frame and threading it.

Here are some differences between this tapestry and the last one: The frame is about 2 feet on a side, coming out slightly wider than it is tall–instead of almost 3 feet wide and a full 6 feet tall.  There are just as many (actually a few more) warp threads as last time, however, since they are spaced at 6 to an inch instead of 4 to an inch.  Since the weft threads aren’t thinner (Elisabeth thinks they’re thicker), this should make the pixellation of the tapestry closer to square.

The most interesting and possibly painful thing about this tapestry is that it will be divided into two parts, each featuring a gryphon to mirror the other.  We’re thinking that we may make a jagged or curved border (depending on how you look at it) to show that the two pieces should fit together.  This will allow each of us to take one gryphon with us when we part ways in the spring, perhaps for help with traveling (or in my opinion, lie detecting.  There are lots of myths about gryphons but one is that it is impossible to tell lies in front of them).

To make the frame, we took a piece of wood 1/2-3/4” thick, 2.5” wide, and 8 feet long.  We cut it into two 26” pieces for the top and bottom, and two 22” pieces for the sides.  We also bought two (we thought only one, but apparently two) metal corner-braces from the hardware store where we got the wood, and used them on diagonally opposite corners.  (We learned the hard way that it’s a good idea to brace at least one corner when we made the dragon tapestry.) It might be more stable to brace opposite corners, but this way we could pick our right angles more carefully.  The side pieces were inset and the top and bottom nailed over them, because the warp threads will pull the top and bottom inward so we wanted them braced against the side pieces.

We made a two-inch-long mini-ruler of 1/6” by marking down to the 1/2” and then estimating.  Using a tape measure along the middle of each piece, we made marks for 24 inches on the top and bottom, leaving about 1/4” margin inside of the side pieces.  We drilled with a 3/32” bit that broke after completing its task. 😦  Since 1/6″ is so small, we wanted to pick the smallest size we had that would allow the warp threads to pass through. Even so, we had enough trouble drilling the holes so close together that we ended up staggering them above and below the center line in order to keep them farther apart. We’re hoping that the resulting 3-D effect will flatten out fairly quickly once we start weaving.

The warp threads are twisted cotton twine, just like last time.  On the one hand, we couldn’t have got the thread through the holes without tapestry needles (we got them through on the last tapestry, and did much of our weaving, before Silkspinner brilliantly bought large tapestry needles, but those holes were bigger); on the other, since the only tapestry needles I have are size medium (too small), getting the needles threaded was a production in itself.  So each thread did double duty, with a knot at one end, going from one side to the other, knotting in the middle to preserve tension (and in case one half breaks) and going back and finally knotting at the side where it started.  That way we only had to do half as much threading and 3/4 as much knotting as otherwise.

1111082149

We’ll update you with more pictures!  Especially when we have a real camera to work with.  Here’s the nailed-together and threaded frame, with Elisabeth hiding behind it, courtesy of my cell phone camera.  The next step is to test out the thread we bought for the background weft, as it’s a unique variegated yarn and if there isn’t enough of it we can’t get more. :/

Welcome to the HRSFANS crafts blog

(I’ve tagged a bunch of categories that I anticipate we’ll want, so that they can come into existence)